| Details | - Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
- A test report relating to the serial number is drawn up for each pump
| |
|---|
| Product details | - Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
- A test report relating to the serial number is drawn up for each pump
- As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
- These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
- These pumps can generate both positive pressure and vacuum
- Oil to be used for lubricating the vanes: genuine oil from B. P. Item number: BP5070
- These pumps are supplied with standard vanes ("Long-life" vanes available on request)
- Without pressure relief valve and vacuum valve
- The pumps are delivered without lubrication oil (BP5070)
- Including PTO shaft cover
- Composition of the item numbers: MEC = series, 8000 = type, M ;= Indirect drive 540 rpm, A = automatic lubrication
- On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
- On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
- In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
- Pumps with indirect drive (M) must be driven anti-clockwise
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
| |
|---|
| Technical info | - Composition of the item numbers: MEC = series, 8000 = type, M = indirect drive 540 rpm, A = automatic lubrication
- On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
- On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
- In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
- Pumps with indirect drive (M) must be driven anti-clockwise
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
| |
|---|
